简体中文 ENGLISH

HT36000 Automatic Hydraulic Press

Generally used to press Tile thickness: 3-30mm Tile size: 8-400x1800mm、 4-800x1800mm、 4-900x1600mm、 3-1200x1600mm、2-1600x1800mm、1600x3600mm etc. Floor tile, L-size thin tile (slab), glaze-polished tile, full body marble tile and sintered stone.

The adoption of die forming, square cylinder and belt charging is characterized by strong technological adaptability, good tile quality, low powder wastage and low comprehensive cost.

Back to list

Technical Characteristics Technical Parameters Lay-out Drawing Scene Image

1.The composite frame pre-tightened with steel-wire of high fatigue property and bearing stability.
2.The new belt charging technology can make charging more even and realize the whole body pattern texture.
3.Mature die formation pressing process is adopted to make tile more compactand of higher quality. There is no need to cut edge before firing to reduce powder waste.
4.The deep back pattern can be set on the back of the tile by die formation, which is conducive to paving. And the mold has long service life and low cost.
5.The square cylinder have been patented and it has features of more even pressing load distribution, small brick deformation and fast pressing speed.
6.The tile width can be adjusted by replacing the mold and the tile can be cut into various specifications as required to realize flexible production.
7.It is equipped with quick die change system with short changing time and low labor intensity.

8.The equipments of the whole production system are all used by intelligent centralized control and management with the function of data network, which can be connected with MES, ERP and other factory production management systems.

HT36000参数的对比表
压机参数 UNIT HT27000 HT32000 HT36000 HT40000 HT48000 HT53000
最大压制力 kN 270000 320000 360000 400000 480000 530000
系统压力 Mpa 22 22 22 22 22 22
动梁最大行程 mm 295 295 295 295 295 295
最大填料深度 mm 60 60 60 60 60 60
周期加压次数 times 2~5 2~5 2~5 2~5 2~5 2~5
最高压制频率 min﹣¹ 3.5 3.5 3.0 2.5 1.5 1.5
主机重量 t 470 550 700 740 840 980
最大成型压力 bar 480 480 480 480 480 480
砖坯最大规格 mm 1200x3600 1600x3200 1600x3600 1800x3600 1600x4800 1800x4800
砖坯宽度 mm 900~1200 1200~1600 1200~1600 1500~1800 1200~1600 1500~1800
砖坯厚度 mm 5~25 5~25 5~25 5~25 5~25 5~25

Products Recommended

  • support hotline 0757-87336633

    address :广东省佛山市三水中心科技工业区C区25号

    mail :hlm@hltpress.com